MASKING TECHNIQUES 3

This week we are using masking tape to block out strips of surface area.  When using masking tape, or low tack tape, it is always best to tap it against your skin or clothing to remove some of the tacky so it doesn't tear the surface of your card when you peel it away.  You will notice, that by follwing the grid lines on my cutting mat, I was able to mask off in straight lines....always a plus ha ha ha !!!

For this first card, I used two colours of distress inks.  I favour these as they are dye based inks that  blend really easily.  Pigment inks can be very wet, although the Colorbox Cats Eye Chalk inks also blend fantastically.  Work with your Cut 'n' Dry foam in swirling circular motions, starting with your lightest colour so you don't contaminate your foam with the darker shade.  Make sure you work slightly over the masking tape, to ensure you will have a crisp and defined edge when you remove the tape.

It goes without saying, peel your tape back carefully and slowly to avoid any surface tears.  Simply over stamp with an image and a sentiment on the white.  I'm sure you will agree, it's a striking contrast and easy to achieve.

Now for this card I revisited Masking Techniques 1 (June 15th), firstly masking out the centre section, then stampng small dragon flies randomly in the top section, and covering with Post-It note masks.  I then used spray inks to colour (but ink pads would work and give a crisper edge as the sprays can weep slightly under the masking tape).  As I was using sprays, I flicked and splattered some of the colour, and also drips of black liquid ink, just to add interest and break up some of the white band.  I then removed the masks and stamped another stamped dragon fly and a sentiment to complete the card.
Christine