Rocker card

Another quick and easy card for you this week....you can tell who's busy can't you !!!!

Begin by scoring a piece of card in half.  Now bearing in mind that this score line will need to fall in a diagonal position, it is best turning the card until you think it is where it needs to be....try and visualise the finished card.  Then draw a line in the other diagonal direction, from what will be the top point, that looks as if it is flowing at a similar angle.  This is your cutting line.  When you have cut something that resembles a triangle at the top, use a plate or something similar to draw a cutting line for the bottom 'rocker' scoop.

As you can see in the picture on the left, the card only sits on a small part of the lower edge - that which is most prominent - this allows it to rock from side to side.  You will notice that I have put the sentiment on a mat at the top.  Partly because I wanted to add a sentiment, but more importantly, adding a little weight at the top (evenly spread over the centre so that it is balanced) which enables the rocking to retain momentum for a while before you have to set it going again.

The photo on the left shows a close up of the lower scoop. 


I decorated my card simply, using the shape of the base card to graduate down for my mats, first in mulberry paper (wet and torn for a wispy edge) then a piece of patterned paper.  I finished with a Magnolia girl, stamped, coloured and cut out and slightly domed and attached with silicone glue to give a little dimension.  


At at the top, I punched 2 holes to thread a piece of ribbon through, tied in a bow, cured the ribbon around some scissors, and added some punched card flowers, fixed back to back on the ends of the ribbon to weight it to hang down.

Have fun....sorry I must dash
Christine

Teatime Tote

This is a great little gift than everyone will be able to make.  It isn't complicated.  Simply follow the instructions and pass it on to someone with love.








 It can be made from the size of an A4 piece of paper.  It does look better if you use a double sided paper, but there is nothing to stop you sticking 2 thinner, single sided sheets together.  A4 size is 21 cms wide by approximately 29.8 cms

The red diagonal lines in the four corner areas will need to be removed after you have scored all lines indicated by a dashed line, and cut on the solid lines.

So in the landscape position, score 2.5 cms; 2.5 cms; 7.5 cms......and repeat from the other end so that the 'odd amount leftover' will become the base.

In the portrait position score at 7 cms; and 7 cms, so you have 3 equal sections.

When you score the diagonal lines (this is the landscape view), on the 7.5 cms width, start your score 1/2 cms within the score line. 

 After you have removed those 4 corner sections, fold in the 4 diagonals.

Flip over and turn back the outer 2.5 cms sections.










 

 Flip back and fold in the left third.....

......then fold in the right third.

Keeping these folds on the outside, pull one end around to meet the other, and faster with a clip or peg.

Grab your tea bag, and if you wish, you could type or write a little rhyme and cut out in a shape of your choice.

Put the tea bag in one pocket and the rhyme in the other.....then pass it on with love to someone you feel may need a lift and a smile.

Christine

Caught in a Crystal Panel

You will need:
Acetate
Black Stayzon ink
Johnsons Klear floor polish
Tissue paper (white)
Acrylic paints
Rubber stamps
Paintbrush
Hairdryer
Scissors 






Ink up your stamp/s and stamp onto the acetate, pressing firmly all over to get a good impression....but be careful the stamp doesn't slide **always keep one hand on the stamp.  Let dry naturally.

On the reverse of the acetate, pour a puddle of the Johnsons Klear, taking care it doesn't run off the edges.  Add your chosen acrylic colours, starting with the lightest colour, and gently swirling into the polish.

Crumple up the tissue paper, then loosely open it out and place onto the polish/paint mix.  Dab gently with a brush to make sure the tissue has good contact with the fluid and the acetate.  You are aiming for plenty of wrinkles, but being careful not to move the paints too much more, otherwise they will all merge into one blended colour and you will lose the overall effect.  If you look at mine, you can still see clear yellow and green areas, as well as where it is a mix of the two.

At this stage, you can speed up the drying process, but only with a hairdryer, as a heat tool would melt the acetate and acrylics.  Plus, the polish could be flammable.  When it is thoroughly dry, it just needs trimming and mounting. Voila :)
Christine

Prick 'n stitch

There are an abundance of patterns, often free in magazines, but you could also make your own quite easily.  Basic shapes can easily be transformed with some creative stitching.  Now I aren't very good with a needle and thread, and I was actually banned from needlework at school, well using the machines at least !!

When you've chosen your design, you will need a pricking/piercing tool and a felt/foam mat.  Carefully attach your pattern to some card with some low tack tape, then prick out, using the mat underneath as a buffer.  If you look at the basic stitches in the pictures to the right, you will see the petals have one hole at the bottom, and pierced around each scallop from about half way up.  The stitches are worked in a fan, with each stitch always being worked through the hole at the bottom of the petal.  The centres are stars.  Again working each stitch into the centre hole, and into each hole around the circle.  The leaves and stem was a basic back stitch.

These are just a few basic stitches, but there is nothing to stop you being more creative and producing other patterns.  Have fun experimenting.  Whilst I consider myself to be abysmal at sewing, I did find this very therapeutic and was quite chuffed with the outcome.
Christine

Art, Love, Beauty - using alcohol inks

 

This week I thought I would play with some alcohol inks...and I'm sure I will at some point in the future, share more.  I've purely called this blog Art, Love, Beauty because of the Cherrypie Art stamp I used to create it. 

For this technique you will need:

Glossy photo card

A busy stamp (florals would work well if you don't have an arty style stamp)

A selection of complimentary alcohol inks/Distress inks (refiller bottles)

Blending solution

An applicator (with a handle to allow control) with a lint pad attached to the velcro end

Archival ink - black

Heat tool

Dot small amounts of the inks and the blending solution, randomly onto the lint pad.  The Distress ink refillers aren't as strong as the ones sold as pure alcohol inks, so you will achieve differing depths of opacity, and the blending solution does what it says on the label - blends. Then using a tapping motion, stamp the lint surface onto the glossy photo card until you are pleased with the mix.  It's quite forgiving and you can over stamp a section if you aren't happy. You will then need to heat set the inks.  I stamped 3 pieces of photo card as I intended decoupaging layers.

Then using the black archival ink, carefully stamp the chosen design onto each of the pieces of glossy card. Whilst you want a good impression, be careful not to apply too much pressure or the ink will skid on the glossy surface.  These must be left to dry thoroughly, generally this will take several days.

Then it's just a case of cutting out and layering what you wish to be prominent pieces.  If you are using a floral stamp, look at which petal or flower is the most prominent, and give it pride of place with extra layers.  You don't have to be limited to three layers either....whatever you think.

Get playing !!

Christine

Gate Fold Card

Another simple card this week with Father's Day looming and little time to really play :(

As with last week, it's just a case of dividing your card up.  This time you are scoring at 1/4 and 3/4 along the length.  So a 6" square finished card would be scored at 3" and 9"  I have done an A5 finished card, so started with an A4 piece of card.  Now I have a M&F score board which has the score lines marked.  However, don't be deterred if you don't have one.  Just trim the length of your card into something that is divisible by 4.  So in this case, 28cms.  You would then score at 7cms and 21 cms.  As you are only trimming a small amount off, it won't be noticeably smaller than the A5.

 

Any mats are only attached by one half of their reverse, to allow the card to open.  It doesn't really matter which side, or if you have multiples, you could have them attached to different sides.  I have attached both my greeting and picture to the left front face, but I could have for example, attached the greeting to the right face. The additional circular sentiment is only attached to the picture mat.



Again, follow the basic principles for dividing your card, and you will find endless possibilities. A longer narrower piece to begin with, could produce a landscape card.  Whereas a square piece will create a taller, slimmer card.

Christine

Easel Card

As Father's Day is almost here, I thought I best get cracking with some cards.  So this week is a simple easel style card.  If you've never made an easel card, it is really quite easy.  The basic principle is to score you card in half, then on the front half, score again in half....so your score lines fall at 1/4 and 1/2 of the card length.  Now this can be achieved in a variety of dimensions.  It may be easier to begin with your finished card face size (what envelope size it will fit into when flat). 

 
The front face requires a focal mat.  It does not have to be the same size as the finished card, but it cannot be any larger.

The front part is folded 'tent' style and is anchored behind something that is raised.  In this example I have mounted a greeting and attached with foam pads.  Depending upon how upright you wish your focal mat to sit, will be determined by the depth of the anchor and where you place it in relation to the front edge.

 
The example I have done began with a 12" x 6" piece of card, scored at 3" and 6" along the 12" length.  The front focal mat is a 6" square.  But don't be limited to this size.....and......what about experimenting with double (or more) easels on the same card, perhaps resting at different angles and heights.

Have fun !!!
Christine